Serving the Phoenix Metro Area

Range Hood Installation in Phoenix

Range hood installation in Phoenix means matching the right hood and ventilation path to your cooktop and kitchen layout, then running the ductwork and wiring so it actually pulls heat, smoke, and grease out of the room — not just bolting a box above your stove.

Tell us about your kitchen and the range you're venting, and get matched with a background-checked Phoenix installer who confirms the ducting and electrical before the job starts.

No app to download. Works right in your browser.

ShowUp Guarantee — no-show means no pay.

Range hood installation in Phoenix, Arizona — an appliance installer fitting a stainless range hood above a kitchen wall.
Rated and trusted
by Phoenix homeowners

Range Hood Installation in Phoenix Without the Guesswork

A range hood looks like a simple swap until you're staring at the space above your stove wondering whether the new hood will actually vent outside, whether the electrical will support it, and whether the CFM is even right for your range.

The default move is buying a hood online because it looks good and hoping it fits the existing duct opening, which can mean undersized ventilation, a mismatched electrical connection, or a hood that never gets properly installed once the duct run turns out to be more complicated than expected.

ShowUp Promise replaces that guesswork: tell us about your kitchen and we match you with a vetted, licensed, insured, background-checked installer who confirms the ducting, electrical, and CFM sizing before the job starts. You get an upfront price, and if the pro does not show, the ShowUp Guarantee means you do not pay.

The Range Hood Jobs Phoenix Installers Handle Most

Most calls come down to a handful of jobs. The installers in our network carry the tools and know the standard sizes and hookups to handle nearly any Phoenix kitchen:

  • Installing a wall-mount or under-cabinet range hood onto existing ductwork and wiring
  • Running new duct through an exterior wall or up through the roof for a kitchen that never had venting
  • Upgrading from a recirculating microwave-hood combo to a true vented range hood
  • Sizing and installing a higher-CFM hood for a commercial-style or high-BTU range, including makeup-air work
  • Installing an island or ceiling-mount hood with ductwork routed through the ceiling and roof
  • Removing and hauling away the old hood or microwave unit

What the Installation Work Actually Involves

Every job starts with your installer measuring your cooktop width and checking your kitchen's actual venting path — through the cabinet above, out the back wall, or up through the roof — before anything gets mounted.

From there they set the mounting height above your range, typically 24 to 30 inches for a gas range, run or connect the ductwork, and wire the hood to power, testing the fan and light before calling the job done.

If your range calls for higher CFM than the existing wiring or ducting supports, your installer flags it before installing anything, rather than hanging a hood that can't actually move enough air.

Range hood installation in Phoenix, Arizona — an installer checking the wiring and fit of a range hood in a residential kitchen.
Range hood installation in Phoenix, Arizona — a finished stainless range hood installed over a gas range in a Phoenix kitchen.

Why Phoenix Kitchens Often Need More Than a Simple Swap

A lot of ranch-style homes across Sunnyslope, Maryvale, and Encanto were built in the 1960s through 1980s with only a recirculating fan above the stove, or no hood at all, so adding real ventilation today means cutting a new duct path rather than just swapping a fixture.

Stucco exteriors are the Phoenix norm, and a wall duct penetration through stucco needs the right cap and flashing so monsoon-driven rain doesn't work its way in behind the finish during the wet months. Newer master-planned neighborhoods around Desert Ridge and Norterra, both served by the Loop 101 and I-17 corridors, often carry HOA rules about what an exterior vent cap can look like, which your installer checks before cutting anything.

Kitchens in Arcadia, Ahwatukee, and the Camelback Corridor that have gone through a remodel with a commercial-style range also come up often — those higher-BTU cooktops usually call for the higher-CFM hoods and makeup-air work covered below.

Permits, Code, and Getting the CFM Right

A like-for-like hood swap on existing ductwork and wiring generally doesn't need a permit. Cutting a new duct penetration through an exterior wall or roof, or adding a dedicated electrical circuit, typically requires a City of Phoenix residential permit.

Your ShowUp Promise installer tells you which category your job falls into and pulls any required permit as part of the work. Properties in Scottsdale, Tempe, Mesa, Chandler, or Glendale fall under that city's own building department instead.

Getting the CFM right matters more than most homeowners expect — see ENERGY STAR's ventilation fan guidance for sizing basics. High-CFM hoods can pull enough air to depressurize a house and cause a water heater or furnace to backdraft, which is why some installations need a dedicated makeup-air system rather than just a bigger fan.

What Range Hood Installation Costs in Phoenix

Installing a new range hood onto existing ductwork and an existing outlet typically runs $150 to $400 in labor. A new duct run through a wall or roof usually adds $300 to $900, depending on the path length and whether attic framing or roofing needs work.

A new dedicated electrical circuit or outlet relocation adds another $150 to $300, and higher-CFM commercial-style installations with makeup-air work run higher still, since that is a bigger scope than a straight swap.

With ShowUp Promise you see an all-in price and approve it before the installer starts, so there are no surprise add-ons after the job. Ask what is included — removal and haul-away of the old unit, ductwork sealing, and a fan test before they leave — so you know exactly what you are paying for.

Serving Phoenix and the Whole Valley

ShowUp Promise matches homeowners with appliance installers across Phoenix and the wider Valley, including Ahwatukee, Arcadia, Desert Ridge, Deer Valley, Laveen, Scottsdale, Tempe, Mesa, Chandler, and Gilbert. Wherever you are located, there is likely a vetted pro nearby who installs range hoods in Phoenix kitchens every day.

Need help with another kitchen appliance instead? The same network covers other appliance needs Phoenix homeowners have, like wall oven installation in Phoenix, dryer vent installation in Phoenix, Wolf appliance repair, Electrolux repair, and appliance repair in North Phoenix. You can also browse all of our trusted contractors in Phoenix in one place.

The ShowUp Guarantee

Every installer in the ShowUp Promise network is vetted, licensed, insured, and background-checked before they ever reach your kitchen. You approve the price before work starts, and if a pro does not show, you do not pay — the system automatically works to reassign your job to the next available verified pro so you are never left with a half-installed hood.

Range Hood Installation Phoenix FAQ

How Much Does Range Hood Installation Cost in Phoenix?

Installing a new range hood onto existing ductwork and an existing outlet typically runs $150 to $400 in labor. If the job needs a new duct run through a wall or roof, add $300 to $900 depending on the path and penetration. A new dedicated electrical circuit or outlet relocation adds another $150 to $300. With ShowUp Promise you see and approve an all-in price before the installer starts, so there are no surprise add-ons after the job.

Ducted or Ductless — Which Range Hood Do I Need?

A ducted range hood pushes heat, smoke, and grease outside through wall or roof ductwork, and is the better choice for gas ranges or high-BTU cooktops where real exhaust matters. A ductless hood recirculates air through a charcoal filter instead, which works when there is no practical path to the exterior — common in mid-kitchen islands or condo units. Your installer checks your cabinet layout and roofline during the visit and tells you which option is realistic before quoting the job.

Do I Need an Electrician for Range Hood Installation?

Not always. If there's already an outlet or junction box near the mounting point and you're installing a standard under-cabinet or wall-mount hood, an appliance installer can typically wire it directly. If no outlet exists where the hood will hang, or you're installing a higher-draw insert hood with heat lamps or a larger blower, you need a licensed electrician to add or relocate the circuit first. Our network includes pros who can tell you which situation you're in before work starts.

Does Phoenix Require a Permit for Range Hood Installation?

A like-for-like swap using existing ductwork and an existing outlet generally does not need a permit. Cutting a new duct penetration through an exterior wall or the roof, or adding a new dedicated electrical circuit, typically requires a residential permit from the City of Phoenix Planning & Development Department. A licensed installer in our network pulls it when the job calls for one. Properties in Scottsdale, Tempe, Mesa, Chandler, or Glendale fall under that city's own building department instead.

What Size Range Hood (CFM) Do I Need for My Kitchen?

A rough baseline is 10 CFM per inch of cooktop width, so a standard 30-inch range calls for at least 300 CFM. Wider or higher-BTU commercial-style ranges — 36 inches or more, or burners rated above 30,000 BTU — often need 600 to 1,200 CFM, and pulling that much air can require a dedicated makeup-air system so the house doesn't run at negative pressure against water heaters or furnaces. See ENERGY STAR's ventilation fan guidance for sizing basics, then have your installer confirm the right CFM and any makeup-air requirement for your specific range before you buy a hood.

Can a Range Hood Be Installed Without Existing Ductwork?

Yes, two ways. If there's no practical path to the exterior, a ductless hood recirculates air through a charcoal filter instead of venting outside. If true ventilation matters — replacing an old recirculating microwave-hood combo, or adding a range hood to a kitchen that never had one — an installer can run new ductwork through a wall or up through the roof, depending on your cabinet layout and attic access. Your installer scopes the routing on-site before quoting, since attic framing and roofline shape the real cost.

Get Your Range Hood Installed Right

Match with a vetted, licensed, insured Phoenix installer who sizes and vents your range hood correctly the first time and shows up when they say they will.